Storming Shakespeare: creating an artists' book

The covers are fastened with ribbons (front) and a silver hook and loops (back).

Kellett’s iron hand press

The first major task was to research, write, and edit the essay, which I then computer typeset in Brioso typeface. I also selected and typeset the quotations and sent the digital files to the photo lab to have positives made, from which I would make the photopolymer plates for printing on my small iron hand press. These processes took some months to complete. The photopolymer plates are cut apart and adhered to a base for use in the Craftsman jobbing press. Two pages are printed at a time, then after drying are printed on the other side. (The platen on this press is too small to print 4-up.)

sewing the gatherings onto ramie bands

Pages are folded, trimmed, and arranged into signatures (gatherings). They are then pricked up for sewing, with the made endpapers. I sewed the essay part of the book on ramie band, which is strong and flat. The bands are then trimmed, the back is glued up, and waste sheets trimmed and pasted down.

Gold-flecked pastepaper for the end papers

I made pastepaper for the endpapers, and scattered the damp pastepaper with real gold flakes.

a view of the Globe

The essay part has two illustrations—original drypoint prints. One is of the drunken Trinculo crawling under Caliban’s gaberdine, used as a frontispiece (see the full book view at the top of the post). The second illustration is of the Globe circa 1616 (after Visscher’s engraving), an original drypoint print with chine collé. The two prints are tipped into the book (i.e., on a separate piece of paper, attached with a thin thread of paste along the top edge.)

quoting Julius Caesar

The second part consists of quotations from Julius Caesar and King Lear, and I created two drypoint/monotype images for each play. For the text pages of the quotations I made monotype colored prints (which I thought of as stage lighting) and then printed the quotations on top. The pages were printed on one side only and made into a drumleaf binding: pages are folded, trimmed, knocked up square, and the spine glued up. Each page is then drummed (by gluing together the edges all round top, fore edge, bottom, and spine) so that each side of the new page is printed. End papers are made and similarly attached.

illustrations from the Julius Caesar and King Lear drumleaf book: the lion in the Capitol

the owl in the market place at noon

Using the drumleaf form of binding allows for a double page spread with no stitching to spoil the view.

the completed drumleaf book block

King Lear

I modeled the face of King Lear in this image on a photo of Christopher Plummer playing the role. I used gold leaf for the lightning, and burnished it.

gampi paper

For the third part, “The Storm in the Tempest,” I decided to use a fine handmade Japanese gampi paper on which to print the quotations and the drypoint images, and suspended them over the monotype printed “stormy” pages. The gampi is translucent and is intended to convey the dream-like illusory and magical qualities of the play. To make this binding work, I made gampi guards for each page and sewed the pages individually onto two ramie bands to give extra stability to the book block. A guard is an extra strip of paper at the spine, to compensate for the thickness of the suspended page.

title page for the third part

The colored pages are printed on both sides with monotype, where the color is created anew on the plate for each printing. Each page is different.

Drypoint image of Ariel working his magic on the ship to make it founder.

This center section of the book is fastened with a hook and loop, as you can see on the image above.

making the cover

After the three book blocks have been made, the cover is then constructed. It consists of four boards, joined in a zigzag to provide three places for the book blocks to sit. Materials used are binders’ millboard (a hard-rolled traditional book board), vegetable-tanned goat skin from Hewit’s in Scotland, grosgrain ribbons, and a silver ‘S’ shaped hook to fasten the center section. The title and cover design are blocked using 23-carat gold mounted on a heat-sensitive backing. The four squares represent the four elements shaken by the events in the plays.

gilding the cover

Boards are cut to size and shaped, leather is cut to pattern and pared, the two front boards are joined, leather edges and corners turned in, and the front cover is gold blocked (hot stamped) on the antique press shown. Above you can see the copper block (engraved plate) which has a raised surface in mirror image of the design, in the chase on the right of the platen. The heated chase is fitted upside down in the top platen and when the handle is pulled the upper and lower platens meet, impressing the design on the cover. A cover, already stamped, can be seen in the makeready which here consists of strips of board keeping it in the correct position.

Brockman parer

For the loops, leather is pared and folded around a strip of ramie band. Slits are made in the spine leather and the leather strips positioned then glued down onto the inside covers. Shown above is a Brockman parer, which uses a low-tech double edged razor blade to split off the surplus thickness of the strips.

working with the turn-ins

The turn-ins are trimmed out evenly and the inside is filled to take it up to the same level as the leather, so that the whole surface is level and smooth. The ribbons are fitted, passing through the cover leather, before the front and back covers are filled.

Once the cover is complete, the book blocks are fitted to it, and end papers stuck down. The silver S hook is fitted to one loop, to close that portion of the book.

making the slipcase

The slipcase is made using binding board, pared contrasting leather and the paste paper I made for this and the end papers. It is shaped to make it easier to get the book out of the case.

Storming Shakespeare, fully housed

Here is the completed book in its slipcase. The book itself is 73mm high, 65mm wide, and 28 mm in thickness. It is a Varied Limited Edition of 20, signed and numbered.

Artistʼs Statement
“I enjoy the variety of elements that make up a book: text, illustrations, printing and binding are designed to complement each other and make a cohesive whole. Making miniature books is particularly demanding as each part has to be scaled down and thoughts distilled to make a functioning book that appeals to the eye, mind and
the sense of touch. They present the ultimate challenge, both creatively and technically. Because they are small, I can use luxurious materials and create books that will give lasting pleasure. Their small size makes for an intimacy between reader and book, giving the impression of an almost secret pleasure, something that is to be savoured rather than swallowed whole.”